2011 PETERSON PACIFIC 4310
Drum chipper, Cat C18-765HP, chip accelerator/grates, remote control, twin disc clutch (original), fire suppression system. Updated cover panels, belt guards, overhead load adapter, belt tensioner, belt pulleys. All history available, very nice, smooth running drum chipper. One owner.
2011 PRENTICE 2570
SH50 sawhead, 28L tires. Lower hour machine. Call for complete written condition report.
2011 TIGERCAT 635D
25′ grapple, hi cap fuel tank (no winch), 35.5 front and 750/50-2635 rear tires. One owner.
2011 WOODSMAN 440
C18 Cat, 630hp, remote control, flexair fan.
2010 BANDIT 3590
Cat C18, 700hp. Well maintained one owner machine running daily. Engine rebuilt June, 2017 complete. Hardfaced pockets, infeed transition, infeed chain idlers, etc. Replaced original chains at 8500 hours.
2010 Cat 559B
CTR 426 delimber, 5055TWR50 grapple, Evans trailer. Just arriving. Call for details, status.
2010 CAT 573
SC 56 saw, 30.5 tires. Solid machine. Few minor fix up items (A/C, park brake, minor leaks, couple hose guards missing, two small cracks in sawdisc). Center and cradle are tight. Good powertrain. Call for complete condition report.
2010 DEERE 335D
CSI 264 Ultra delimber, Rotobec 4045HD grapple.
2010 MORBARK 25/36
Deere 400hp, auto reverse, reversing fan, compressor, remote control.
2010 Prentice 2280
CTR 320 delimber, 4045TWR50 HD grapple, Evans trailer. Priced as is, needs some repairs.
2010 TIGERCAT 620D
Dual arch, 15′ grapple, 35.5 tires with severe duty axles, winch, 2.18 transfer case, JS steering.
2009 Morbark 2755
Three flail, three pocket, 7/8″ chip, endloading spout, dual engine, wet clutch. Cat C27 tier 2 main engine @ 875hp and Cat C13 tier 3 flail drive engine @ 440hp. One owner unit just recently shut down. Well maintained with one job supervisor and one operator since new. Call Paul at 803-920-0693 for further details.
2009 MORBARK 2755
Dual engine (Cat 3-27 & C13), three flail, three pocket, end loading flail chipper. Recent Cat rebuilds on both motors.
2009 Tigercat 610C
Dual arch, 13′ grapple, winch, 30.5 tires. Low hour, one owner machine. Serviced and ready to go. Call for written condition report for more details.
2009 TIGERCAT 718E
Tigercat 5000 sawhead, 28L tires. New saw disc/bearings Dec 2013, new hydrostat pump and motor April 2015. Cleaned, repaired, serviced and ready.
2008 Deere 848H
Call for price
Dual arch, winch, SWEDA axles. Just arriving. Call for details, status. Low hour 08 model.
2008 LIEBHERR R934C
Hydraulic cab riser, 40' live heel boom with Rotobec 4560SHD grapple, 30″ grousers. Excellent millyard machine. Call for complete written condition report.
2008 PETERSON PACIFIC 5900
Standard 23″ disc chipper with Cat engine. In route to Lexington, SC. Will have updated pictures, inspection upon arrival.
2008 TIGERCAT T250B
32′ live heel boom, hi rise hydraulic tilt cab, 36″ pads, HD counterweight, Tigercat LG4053 grapple, Delimber/slasher lower hydraulics.
2008 TRELAN 23RC
Cat C27, 800 hp. Remote control. Run on clean chip operation. Well maintained.
2014 TIGERCAT 620E
Dual arch 17' grapple, winch, 30.5 tires. Cleaned, repaired, serviced, ready to go. Written condition report available upon request.
2007 Barko 595ML
CTR 450 delimber, QSB 6.7 Cummins engine. Rotobec 4048HD grapple. Machine runs out very well. Has good pin joints and good turntable. Engine original and runs good with minor blowby. Pumps original and hold proper pressure but have some leakage. Call for complete condition report.
2007 Cat 324DFM
FM LGP version. Hydraulic cab tilt. 36″ triple grousers, 38′ live heel, 55″ Cat log bypass grapple. Cat C7 engine. Has auxiliary ground saw hookups. LGP version has 32″ ground clearance and 9′ track gauge with 11’11” overall width. Approx. 80,000 lbs. Call for complete written condition report. One owner machine.
2007 MORBARK 2355
3 knife, Babbit, 3 flail, Cat 3412E, Morlift 500, compressor, discharge conveyor. One owner machine. Very well maintained, running in a four chipper rotation with three pine plantation chipping jobs. Original engine.
2007 Valmet 475 FXL
Quadco 24″ full rotation sawhead, Cummins QSL9.0 330 hp, 28″ Single Grouser pads on 9″ pitch track chain, 16'9″ track length, pump drive cooler, 1.5″ windshield, GTF80 Lohman final drives, auxiliary fuel tank option, seat is climate controlled (heat and a/c), continuous rotation swing. 10'9″ wide, 12'9″ high, 90,000lbs. One owner. Call for complete condition report.
2006 Deere 648GIII
Dual Arch grapple, 127″, winch, 1400 Extreme axles, 30.5 tires (3 of 4 are still original Firestone tires @ 60%), autoshift and dual steer mode options. Nice, clean, one owner right of way contractor tractor.
2006 Morbark 2355
Three flail, Cat 3412E, 1000 hp, top loading chute, aux air compressor, PT Tech clutch, hydraulic air curtain, Morlift 500, Webasto heater. Unit was a Morbark rebuild in 2012 at 9089 hours. Michigan Cat rebuilt engine complete at that time. Very nice, tidy machine.
2006 MORBARK 30RXL
Four knife chipper. Cat 3412E, separator, Morlift 1000 loader. Rotates in fleet on pine chipping crew. Engine rebuild at 8,000 hrs.
2006 TIGERCAT 720D
Tigercat 5600 saw, 30.5 tires, 3597 engine hours on Recon Cummins. Cleaned, serviced, repaired and ready to go.
2005 TIGERCAT 250T
Hi rise, hydraulic tilt cab, 32' live heel boom, Rotobec 4552HD grapple, 28 double grousers. Bar/circle saw slasher lower hydraulics. One owner.
2005 TIGERCAT 250T
Hi rise cab, hydraulic tilt, 32’live heel boom, Tigercat LG4053 grapple, 36″ tracks. Recon engine dated 12/22/12. 36″ triple grousers. Lower saw hydraulics. Call for written condition report.
2005 TIGERCAT 630C
Dual arch 18′ grapple, winch, 1400 Extreme axles, 30.5 tires. Engine replaced 2010 and has 7430 hours (new ECM). Hydrostat motor and pumps rebuilt 2000 hrs ago. New MDM monitor replaced 7306 hours ago from which the hour meter reads. Unknown actual original hours.
2005 TRELAN 23RC
Cat 3412E 760 hp, remote control. Run in clean chip operation. Well maintained.